| 1 |
WANTED / Parts Wanted / Rubber gater for LDM30 |
on: November 20, 2009, 03:28:41 PM |
| Started by billysolo | Last post by billysolo |
I am looking for a rubber gater for the radiator filler cap dashboard housing for my LDM30 can any one help, Thanks, Billy  |
  
|
| 2 |
WANTED / Parts Wanted / 1966 LDM30 2.2 Petrol |
on: November 19, 2009, 02:34:25 PM |
| Started by billysolo | Last post by billysolo |
| We have just started to refurbish our newly aquired LDM30 and are looking for a workshop manual or any wiring and mechanical info we can get. Can anyone out there help, Billy |
|
|
| 3 |
FOR SALE / Parts For Sale / Unidentified chassis |
on: November 18, 2009, 07:49:42 PM |
| Started by johnhinson | Last post by johnhinson |
Good day.
I hope I am not out of order here, as I am not a society member. Nor do I know much about Morris Commercials, I'm afraid. It could have been a lorry or a bus.
A farmer I know is disposing of some old chassis, used under farm trailers for some sixty years. I am trying to find homes for them as otherwise they will be scrapped.
One of these bears hubcaps with the letters MC (or maybe CM!) on them, and I immediately thought it may be a Morris Commercial.
A picture of it can be viewed at http://www.self-preservation-society.co.uk/chassis/4-3.jpg .
Can anybody confirm this, or tell me (if it isn't) what it might be?
More photographs information of this and other chassis for anybody interested can be found at http://www.self-preservation-society.co.uk/chassis/
Kindest regards,
John |
|
|
| 4 |
GENERAL / Chat / Re:existing member now registered |
on: November 17, 2009, 06:36:26 PM |
| Started by bk 1 | Last post by bk 1 |
thanks hairy -neil
i have made contact with vintagewings and they are going to send me a quote
thanks again billy kelly |
|
|
| 7 |
GENERAL / Chat / Re:Morris Commercial |
on: November 15, 2009, 02:46:42 PM |
| Started by OTTretro | Last post by Mark Bailey |
I'm no great expert, but your engine number suggests it's a post-war vehicle. Appearence wise there are three clues: 1. Are the bottom edges of the sides of the bonnet curved or straight? 2. Does the radiatior grill bow slightly inwards or curve outwards? 3. Is the front bumper of 'D' section with a bolted on lug for the starting handle, or a squarer, deeper style with the starting handle hole going through it?
Lastly, is there any sign of lettering under the current paintwork on the van body and cab door panels? It may be worth while rubbing down these areas with wet & dry paper to uncover any signwriting or transfer markings that will help identify a previous owner. In turn this will be an aid to tracing your vehicle's history and the dating of it. Also any chance of a photo?
Happy hunting,
Mark |
|
|
| 8 |
GENERAL / Chat / existing member now registered |
on: November 14, 2009, 03:35:23 PM |
| Started by bk 1 | Last post by bk 1 |
| billy kelly saying hello to all members have been a member for a few years but not on web have had a 1962 morris fgk 40 for a few years and have now started to refurbish it , have removed dropside platform and started to clean chasis noticed it could do with a couple of new front wings and wheels are quite hard to turn have slackened breaks off which has helped , does anyone know where i could get tool for removing hubs or identify type of thread it measures 2.5" and about 16 tpi. and if anyone knows where i could get new wings either off shelf or made it would be a great help thanks billy kelly |
|
|
| 9 |
WANTED / Parts Wanted / morris fgk 40 |
on: November 14, 2009, 02:52:56 PM |
| Started by bk 1 | Last post by bk 1 |
hi all i am looking for two new front wings for my morris fgk 40 year 1962 can anyone tell me where i could get them and if all the wings are the same size ie on fgk 30,
fgk40, fgk60, fgk80, and fgk100
i have been a club member for a few years but am new to the web site
hopefully some kind knowledgeable person can point me in right direction
thanks billy |
|
|
| 10 |
WANTED / Parts Wanted / morris fgk 40 |
on: November 14, 2009, 02:34:07 PM |
| Started by bk 1 | Last post by bk 1 |
hi i am looking for service tools to remove front hubs from my bmc morris fgk 40. i believe they are the same on austin bmc ,i have an austin workshop manual and it is showing
part numbers 18G8 hub assembly remover
18G8Q front hub remover adaptor (2 and 3 tonners) .
i have been a member for two or three years and am now just getting to grips with my old lorry and start refurbishing it thanks billy ps. does anyone know the thread of adaptor
|
|
|
Return
to the board index.
|
|
|
